| Specification | Details |
|---|---|
| Input Interface | 2-channel three-pin XLR female connector |
| Output Interface | 1 RJ45 (transmits 2 channels of Dante network audio) |
| Power Consumption | <1W |
| Maximum Signal Level (Balanced) | 18dBu |
| Frequency Response | 20Hz–20kHz, ±0.5dB |
| Impedance | 20KΩ (Balanced), 10KΩ (Unbalanced) |
| Dynamic Range | >100dB |
| Signal-to-Noise Ratio | >100dB |
| THD+N | <0.003% @4dBu, 1kHz |
| Power Supply | 802.3af / 802.3at standard PoE switch |
| Sampling Rate | 48kHz |
| Bit Depth | 24-bit |
| Operating Temperature | -10°C to +40°C |
| Operating Humidity | 5%–95% RH, No condensation |
| Dante Device Latency | 1, 2, or 5ms (configurable via Dante Controller) |
| Network Transmission | Dante / AES67 / RTP Audio |
| Noise Floor | -90dBu |
| Product Dimensions (L×W×H) | 98mm × 72mm × 40mm |
| Weight | 0.2kg |
| Package Dimensions (L×W×H) | 145mm × 145mm × 80mm |
| Package Weight | 0.3kg |
S-Track - OSTRICH XDI22
This product is an audio interface device based on the internationally recognized Dante protocol, capable of converting analog audio signals into digital ones and routing them through the Dante protocol to any Dante audio transmission network device. It offers high-quality, long-distance transmission, low latency, strong anti-interference ability, and convenient networking capabilities. The device utilizes high-quality AD/DA conversion chips, bridging your analog devices and more into the world of networked audio.
Related Products
-
USB Audio Card
Symetrix - USB Audio Card
-
xIO Bluetooth Black / Whtie
Symetrix - xIO Bluetooth Black / Whtie
-
xIO Bluetooth RCA-3.5
Symetrix - xIO Bluetooth RCA-3.5
-
New
OSTRICH XDU22
This product is an audio interface device based on the international Dante protocol, capable of USB digital audio signal input. It can route through the Dante protocol to any Dante audio transmission network device, achieving high-quality, long-distance, low latency, strong anti-interference capability, and easy networking. At the same time, it supports the access of any Dante network
digital audio, converting it into a USB digital audio signal output. In other words, this Dante USB adapter allows you to connect any computer or mobile phone (supporting UAC1.0) to the Dante audio network without installing any software, and enables the use of any audio application to play or record audio. It is an ideal choice for conference rooms and presentation events.
S-Track - OSTRICH XDU22
-
New
DPANEL X
This product supports two sets of balanced I/O analog signals through the local area network access to the Dante system, the input interface using two-in-one XLR socket, providing phantom power switch, input signal gain adjustment function, you can access a higher quality condenser microphone. The output interface is a standard three-core XLR socket, outputting a balanced analog signal. Back network interface, please use Category 5 or above shielded twisted pair cable to connect the POE switch.
S-Track - DPANEL X
-
New
OSTRICH XBD22
The product is a Bluetooth and Dante inter convertible, two-way stereo transmission, PoE-powered, wall-mounted transmission panel. Through the Bluetooth interface and cell phones, iPad and other devices connected to the received audio through the Dante converted to network digital signal transmission, power, control and audio data are transmitted by the network cable connection, without having to worry about ground loops or other consumer equipment common audio problems. The main applicable scenarios are teleconferencing, audio media transmission and so on.
S-Track - OSTRICH XBD22
-
xIO Stage 4×4
Symetrix - xIO Stage 4×4
-
xIO Bluetooth
Symetrix - xIO Bluetooth
