S-Track DPANEL X

S-Track - DPANEL X

Request for quotation

This product supports two sets of balanced I/O analog signals through the local area network access to the Dante system, the input interface using two-in-one XLR socket, providing phantom power switch, input signal gain adjustment function, you can access a higher quality condenser microphone. The output interface is a standard three-core XLR socket, outputting a balanced analog signal. Back network interface, please use Category 5 or above shielded twisted pair cable to connect the POE switch.

Brand: S-Track
SKU: E4WHMP818G95463
Categories: , ,
Tags: ,
Specification Details
Input Interfaces 2×3-pin XLR female connectors
1×RJ45 (transmits 2 channels of Dante network audio)
Output Interfaces 1×RJ45 (transmits 2 channels of Dante network audio)
2×3-pin XLR male connectors
Phantom Power DC 48V
Input Impedance (Balanced) 20kΩ
Output Impedance (Balanced) 100Ω
Common Mode Rejection 60dB @ 50Hz
Dynamic Range >100dB
Frequency Response 30Hz–20kHz, ±0.5dB
Noise Floor -90dBu
Signal-to-Noise Ratio >100dB
THD+N ≤0.005% @1kHz, +4dBu
Channel Isolation >100dB @1kHz
Maximum Output Level 20dBu
Maximum Input Level 18dBu
Sampling Rate 48kHz
Bit Depth 24-bit
Network Transmission Dante / AES67 / RTP Audio
Dante Device Latency 1, 2, or 5ms (configurable via Dante Controller)
Power Supply 802.3af / 802.3at standard PoE switch
Power Consumption 5W
Operating Temperature & Humidity 0–40°C, 10%–90% RH, No condensation
Product Dimensions (L×W×H) 120mm × 117mm × 57mm
Weight 0.63kg
Package Dimensions (L×W×H) 145mm × 145mm × 80mm
Package Weight 0.73kg

Related Products