Headset Microphone for NTH-100

Key Features:

Transform Your NTH-100 Headphones

With the NTH-Mic, you can transform your RØDE NTH-100 headphones into a professional headset for a wide range of applications – media, broadcast, podcasting, streaming, gaming, content creation, conference calls and other business applications. It is purpose-built to plug directly into the NTH-100s via a sturdy locking connector, and can be easily removed when you want to only use the headphones.

Transform Your NTH-100 Headphones

Crystal-clear Voice Capture

The NTH-Mic features a high-quality condenser capsule that captures highly detailed sound with a flat frequency response for excellent intelligibility in every environment. The microphone is also optimally positioned for rejecting plosive sounds to keep your audio clean.

Sleek and Stylish

The NTH-Mic features stylish matte finish and a sleek, low-profile design that is unobtrusive and won’t cover your face when in use, ensuring you are free from any visual distraction and look your best on camera.

Sleek and Stylish
nth 100m user guide Fuzion Far East

NTH-100M & NTH-Mic User Guide

Discover all you need to know about your NTH-Mic headset microphone here. This comprehensive user guide covers everything you need to know about attaching and using the NTH-Mic with your NTH-100 headphones.


Acoustic & Electrical Specifications

Acoustic Principle
Permanently polarized
Active Electronis
JFET impedance converter
Acoustic Principle
Frequency Range
20Hz - 20kHz
Signal-to-Noise Ratio
Equivalent Noise Level (A-Weighted)
27dBA Typical
Maximum SPL
106dB SPL RMS (Plug-In Power, 1% THD) 123dB SPL RMS (Plug-In Power, 10% THD)
Maximum Output Level
307mV (@ 1kHz, 10% THD into 1KΩ load)
38dB re 1 Volt/Pascal (12.59 mV @ 94 dB SPL) +/- 3 dB @ 1kHz
Dynamic Range
92dB @ max input
Connection Type
3.5mm bayonet jack (for NTH-100)

Mechanical Specifications

Weight (grams)
Dimensions (millimetres)
Length: 123

Height: 40

Depth: 17

Box Contains


1 x NTH-Mic

2.4m TRRS Cable

1 x 2.4m TRRS Cable

Splitter Cable

1 x Splitter Cable

Related Products

rode nth 100m slide01 Fuzion Far East


NTH 100





EU Declaration of Conformity
UKCA Declaration of Conformity


Click below to find out more about this product.

No, the NTH-Mic is custom-designed for the NTH-100.

The jack has a TRRS connector, allowing for two-way audio transmission.

Yes, you can connect the NTH-100M to the RØDECaster Pro II using the included splitter cable and a 3.5mm to XLR adaptor that converts phantom power to plug in power, such as the VXLR Pro or VXLR+. Plug the end of the splitter cable with the microphone symbol into the VXLR Pro, then connect this to any of the RØDECaster Pro II’s XLR inputs and ensure phantom power is turned on for that channel. Then plug the other end of the cable into one of the RØDECaster Pro II’s headphone outputs using the supplied ¼-inch to 3.5mm adaptor to monitor your audio.

The NTH-Mic works with any mobile device that has a 3.5mm TRRS headphone port, or when used with the adaptor that came with your phone (I.e. either a Lightning-to-3.5mm or USB-C-to-3.5mm adaptor) so long as it supports a TRRS connection.

Reserve a product Demonstration

Trial our Products for your experience!

Book Now

Line ID: @fuzion
Tel: 02-641-4545
Email: [email protected]
Facebook: Fuzion Far East  
Fuzion Facebook Group: Fuzion Privilege Group  
Youtube subscribe: fuzionfareastbkk
Instagram: fuzionbkk