RTI
RTI elevates the smarthome and smart business experience with an intuitive and powerful suite of control and automation solutions.
Showing 1–16 of 74 resultsSorted by latest
-
KX2 Bezels
RTI - KX2 Bezels
-
WK2 Conduit Box
RTI - WK2 Conduit Box
-
KX10 Back Box
RTI - KX10 Back Box
-
KX3/KX4 Back Box
RTI - KX3/KX4 Back Box
-
ECB-5 IR Emitter Connecting Block The ECB-5 IR Emitter Connecting Block provides expanded infrared signal distribution when used with RTI control processors, in-wall touchpanels, device connecting blocks (CB4/CB8), third party infrared repeater systems, etc. It has one infrared signal input and five emitter output ports that allow the connection of up to five single or dual infrared emitters. It also incorporates a sense input for monitoring the power status of a switched outlet, current sensor, light sensor, etc.
RTI - ECB-5 IR Emitter Connecting Block
-
CM-232 Serial Communication Module The CM-232 communication module provides an RS-232 interface to almost any RS-232 enabled device. It attaches to an RTI control system such as the XP-6s Control Processor on one end, and a device's DB-9 serial port connector on the other end. The CM-232 is capable of one-way transmission (no receive function is supported) of user-defined character or binary strings. These character strings, as well as the baud rate, parity, and bit structure are programmed using RTI's Integration Designer software package.
RTI - CM-232 Serial Communication Module
-
VPS-1 Voltage Power Sensor The VPS-1 Voltage Power Sensor monitors the on and off status of almost any electronic component. It is used to provide power status information to RTI control system such as the XP-6s control processor. When the attached component is powered on, the VPS-1 detects the voltage supplied from the component, an attached power supply, or a third-party power sensor, and sends a signal to the System Interface Module.
RTI - VPS-1 Voltage Power Sensor
-
Programming Cable (for the T4x T2x, T3x, T2i)
RTI - Programming Cable (for the T4x T2x, T3x, T2i)
-
ZB-Pro Professional 2.4GHz Network Management Tool The ZB-Pro is a Professional Network Management Tool for use with RTI 2.4GHz wireless ZigBee® networks. Attached to a standard USB port of a PC, the ZB-Pro communicates with ZM-24 Transceiver Modules via 2.4GHz RF during the setup process.
RTI - ZB-Pro Professional 2.4GHz Network Management Tool
-
IR-PRO Professional Infrared Capture System The IR-PRO is an infrared code capture system that is specifically designed for system integration professionals.
RTI - IR-PRO Professional Infrared Capture System
-
RM-433 RF Receiver The RM-433 is a radio frequency receiving device that operates at 433MhZ. It is designed to receive signals that are transmitted by RTI universal system controllers.
RTI - RM-433 RF Receiver
-
CB-8 Connecting Block The CB-8 is an installation accessory designed to provide convenient and reliable power connections for up to eight (8) RTI in-wall keypads, touchpanels and other devices. In addition to providing power, the CB-8 combines and routes the infrared outputs from the touchpanels to a single output for connection to an RTI control processor. Multiple CB-8 units can be daisy-chained for connecting more than eight devices. A 4.3 Amp, 16VDC power supply is included.
RTI - CB-8 Connecting Block
-
ZM-24 Zigbee Transceiver Module The ZM-24 2.4GHz Zigbee® Transceiver Module provides bi-directional communication between two-way enabled RTI remote controls and control processors utilizing Zigbee® wireless communication. Capable of being hard-wired directly to a control processor or be used as a wireless repeater device to create an ultra-reliable, self-healing Zigbee® network.
RTI - ZM-24 Zigbee Transceiver Module
-
PCM-4 Port Control Module The PCM-4 expands the output capabilities of an XP series control processor to accommodate larger projects. Four multi-purpose I/O ports and a voltage trigger output (12VDC) provide convenient control anywhere a local area network (LAN) connection exists. Each MPIO port provides IR routing capabilities, one-way RS-232 communication(using CM232) and power sensing (using VPS1/SPS1).
RTI - PCM-4 Port Control Module
-
CPB-1 Control Port Connecting Block The CPB-1 Control Port Connecting Block provides a cost effective solution for one-room installations such as classrooms, that require an in-wall controller and both infrared and RS-232 control of local devices. The CPB-1 provides power to one RTI user interface and has two output ports that allow the connection of up to two single or dual infrared emitters. It also incorporates an RS-232 port for control of devices without the need of an RTI processor.
RTI - CPB-1 Control Port Connecting Block
-
IPE-4 IR Port Expander The IPE-4 IR Port Expander provides convenient expansion of infrared signal distribution when used with RTI control processors. It has one infrared signal input (3.5mm jack) and four emitter output ports that allow the connection of up to four single or dual infrared emitters.
RTI - IPE-4 IR Port Expander












