Compact, high-power, point source installation speakers
Corporate
Public Places
Theatres
Bar &
Restaurants
Clubs
Corporate
Bar &
Houses of
Professional Installation Loudspeakers
NEXO performance
for cost-critical installations
For more than 25 years, the groundbreaking NEXO PS Series has enjoyed industry standard status as the point source loudspeaker of choice in high end installations around the world. Now the ePS Series builds on the PS platform to create a new, ‘no frills’, IP54-rated loudspeaker range that makes legendary NEXO engineering and performance accessible to a wider range of projects.
The ePS Series delivers NEXO’s trademark musical, high-output, full range sound, with all the versatility that comes with precision coverage, variable HF directivity and a small but flexible range of universal mounting hardware.
Three lightweight point source cabinets partner high-excursion 6, 8 and 10-inch LF drivers respectively with a 1-inch exit HF driver, with dedicated 12 and 15-inch subs available to extend LF performance.
Variable HF directivity for perfect venue coverage
A satisfactory audience experience often necessitates compromise between the wide, short throw coverage required by listeners closest to the stage, and the narrow, long throw coverage required by those at the back of the venue. The asymmetrical horns in ePS speakers are engineered such that vertical coverage is narrower above horn axis than below. Easy for the user to rotate, it ensures optimum directivity for any fixed installation.
6
Measuring 365mm high x 198mm wide x 181mm deep and weighing 7.1Kg, the ePS6 combines a high excursion 6-inch LF driver with a 1.4-inch voice coil HF driver in a trapezoidal cabinet constructed in a closed acoustic design from 15mm baltic birch plywood. Achieving a peak SPL of 125dB with a frequency range of 90Hz to 20kHz, the ePS6 features a rotatable asymmetric horn, convenient
rigging points on the cabinet top, bottom and back, and two pairs of In/Out connectors on pitch screw terminal blocks with an IP cover.
8
Measuring 423mm high x 250mm wide x 227mm deep and weighing 8.1Kg, the ePS8 combines a high excursion 8-inch LF driver with a 1.4-inch voice coil HF driver in a trapezoidal cabinet constructed in a bass-reflex design from 15mm baltic birch plywood. Achieving a peak SPL of 128dB with a frequency range of 80Hz to 20kHz, the ePS8 features a rotatable asymmetric horn, convenient rigging points on the cabinet top, bottom and back, and two pairs of In/Out connectors on pitch screw terminal blocks with an IP cover.
10
Measuring 531mm high x 316mm wide x 285mm deep and weighing 14.8Kg, the ePS10 combines a high excursion 10-inch LF driver with a 1.4- inch voice coil HF driver in a trapezoidal cabinet constructed in a bass-reflex design from 15mm baltic birch plywood. Achieving a peak SPL of 130dB with a frequency range of 70Hz to 20kHz, the ePS10 features a rotatable asymmetric horn, convenient
rigging points on the cabinet top, bottom and back, and two pairs of In/Out connectors on pitch screw terminal blocks with an IP cover.
ePS6, ePS8, ePS10 Main Cabinets
Dedicated eLS400 and eLS600 Subs
130dB Peak SLP (ePS10)
Variable HF Directivity
Universal Mountings and Accessories
Screw Connectors behind IP Cover
Professional Installation Loudspeakers
Ready for any
environment
environment
For more than 25 years, the groundbreaking NEXO PS Series has enjoyed industry standard status as the point source loudspeaker of choice in high end installations around the world. Now the ePS Series builds on the PS platform to create a new, ‘no frills’, IP54-rated loudspeaker range that makes legendary NEXO engineering and performance accessible to a wider range of projects.
ePS cabinets are finished in black structural paint with a UV-resistant acoustic fabric stretched over the protective front grille. White and all other RAL colours are available to order.
An extensive range of cabinet fittings are provided for mounting and rigging hardware. Two M6 with 80mm pitch and one M10 fitting on
An extensive range of cabinet fittings are provided for mounting and rigging hardware. Two M6 with 80mm pitch and one M10 fitting on
the cabinet sides allow connection to U Bracket, bumper or eye bolts.
The back of each speaker is fitted with 3x M6 with 70mm pitch for wallmount in both horizontal and vertical positions.
The back of each speaker is fitted with 3x M6 with 70mm pitch for wallmount in both horizontal and vertical positions.
Connectivity
All three main cabinets and both subs are minimally fitted with a hard-wired strip for connection, offering generic 2 x 7 mm pitch IN/OUT screw connectors. The included IP cover protects the connectors from moisture in outdoor applications.
Dedicated sub bass cabinets
Dedicated eLS400 and eLS600 subwoofers extend ePS system LF response down to 45 and 40Hz respectively. The 1 x 12-inch driver-equipped eLS400 is designed to partner the ePS6 and ePS8, while the eLS600 partners the ePS8 and ePS10. Custom accessories exist to hang ePS cabinets below the subwoofers to create a small footprint wideband system.
400
Measuring 365mm high x 423mm wide x 450mm deep and weighing 14.5Kg,
the eLS400 sub uses a high excursion 12-inch Neodymium driver in a cabinet
constructed in a bass-reflex design. Constructed from 15mm baltic birch
plywood, the cabinet is protected by a strong polyurethane based coating and
the Magnelis® front grille is covered by a black UV and fire resistant cloth.
Achieving a peak SPL of 130dB with a frequency range extending down to
45Hz, the eLS400 features convenient rigging points and two pairs of In/Out
connectors on pitch screw terminal blocks with an IP cover.
600
Measuring 423mm high x 531mm wide x 566mm deep and weighing
26.3Kg, the eLS600 sub uses a high excursion 15-inch driver in a cabinet
constructed in a bass-reflex design. Constructed from 15mm baltic birch
plywood, the cabinet is protected by a strong polyurethane based coating and
the Magnelis® front grille is covered by a black UV and fire resistant cloth.
Achieving a peak SPL of 136dB with a frequency range extending down to
40Hz, the eLS600 features convenient rigging points and two pairs of In/Out
connectors on pitch screw terminal blocks with an IP cover.
Professional Installation Loudspeakers
Power & Processing
NXAMPMK2
With models rated at 4 x 1300 Watts, 4 x 2500 Watts and 4 x 4500 watts, NXAMPMK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution that’s perfect for use with NEXO ePS installations.
Easy to set up and quick to deploy, all essential parameters are readily accessible via a large colour touchscreen on the front panel, with a comprehensive range of control and networking facilities on the rear panel. 96KHz converters and 64-bit signal processing combine to assure pristine sound quality.
With models rated at 4 x 1300 Watts, 4 x 2500 Watts and 4 x 4500 watts, NXAMPMK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution that’s perfect for use with NEXO ePS installations. Easy to set up and quick to deploy, all essential parameters are readily accessible via a large colour touchscreen on the front panel, with a comprehensive range of control and networking facilities on the rear panel. 96KHz converters and 64-bit signal processing combine to assure pristine sound quality.
DTD/DTDAMP
amplifiers to create a flexible, light-weight powering and control solution that’s perfect for use with NEXO ePS installations. Easy to set up and quick to deploy, all essential parameters are readily accessible via a large colour touchscreen on the front panel, with a comprehensive range of control and networking facilities on the rear panel. 96KHz converters and 64-bit signal processing combine to assure pristine sound quality.
Accessories
ePS / eLS cabinets can be fitted with a range of NEXO and universal mounting hardware for horizontal and vertical installation.
VNI-WM200 | VNI-WM280 VNI-WM330
Wall mounting bracket
VNU-HBRK365 | VNU-HBRK425 VNU-HBRK500
Horizontal mounting bracket
VNU-BUMP
Bumper mount
VNI-WMADAPT
Wall mount adapter
VNI-CLADAPT
Ceiling mount
VNI-WM200 | VNI-WM280 VNI-WM330
Wall mounting bracket
VNI-WM200 | VNI-WM280 VNI-WM330
Wall mounting bracket
VNI-WM200 | VNI-WM280 VNI-WM330
Wall mounting bracket
VNI-WM200 | VNI-WM280 VNI-WM330
Wall mounting bracket
Specifications
