Description
Aluminum table / countertop stand for KA11 touchpanels.
Aluminum table / countertop stand for KA11 touchpanels.
The ECB-5 IR Emitter Connecting Block provides expanded infrared signal distribution when used with RTI control processors, in-wall touchpanels, device connecting blocks (CB4/CB8), third party infrared repeater systems, etc. It has one infrared signal input and five emitter output ports that allow the connection of up to five single or dual infrared emitters. It also incorporates a sense input for monitoring the power status of a switched outlet, current sensor, light sensor, etc.
Read MoreThe ECB-5 IR Emitter Connecting Block provides expanded infrared signal distribution when used with RTI control processors, in-wall touchpanels, device connecting blocks (CB4/CB8), third party infrared repeater systems, etc. It has one infrared signal input and five emitter output ports that allow the connection of up to five single or dual infrared emitters. It also incorporates a sense input for monitoring the power status of a switched outlet, current sensor, light sensor, etc.
Read MoreMore Information Request for quotationKX3/KX4 Back Box
Read MoreKX3/KX4 Back Box
Read MoreMore Information Request for quotationKX10 Back Box
Read MoreKX10 Back Box
Read MoreMore Information Request for quotationWK2 Conduit Box
Read MoreWK2 Conduit Box
Read MoreMore Information Request for quotationKX2 ships with white bezel.
Read MoreKX2 ships with white bezel.
Read MoreMore Information Request for quotationUSB cable for downloading program files to the T2i, T2x, T3x and T4x remote controls. Connectors: USB type A to 10 pin RTI remote control connector. Cable Lenght: 6.56 ft (2m). The programming cable is also included with the IR-PRO Professional Infrared Capture System
Read MoreUSB cable for downloading program files to the T2i, T2x, T3x and T4x remote controls. Connectors: USB type A to 10 pin RTI remote control connector. Cable Lenght: 6.56 ft (2m). The programming cable is also included with the IR-PRO Professional Infrared Capture System
Read MoreMore Information Request for quotationThe VPS-1 Voltage Power Sensor monitors the on and off status of almost any electronic component. It is used to provide power status information to RTI control system such as the XP-6s control processor. When the attached component is powered on, the VPS-1 detects the voltage supplied from the component, an attached power supply, or a third-party power sensor, and sends a signal to the System Interface Module.
Read MoreThe VPS-1 Voltage Power Sensor monitors the on and off status of almost any electronic component. It is used to provide power status information to RTI control system such as the XP-6s control processor. When the attached component is powered on, the VPS-1 detects the voltage supplied from the component, an attached power supply, or a third-party power sensor, and sends a signal to the System Interface Module.
Read MoreMore Information Request for quotationThe CM-232 communication module provides an RS-232 interface to almost any RS-232 enabled device. It attaches to an RTI control system such as the XP-6s Control Processor on one end, and a device’s DB-9 serial port connector on the other end. The CM-232 is capable of one-way transmission (no receive function is supported) of user-defined character or binary strings. These character strings, as well as the baud rate, parity, and bit structure are programmed using RTI’s Integration Designer software package.
Read MoreThe CM-232 communication module provides an RS-232 interface to almost any RS-232 enabled device. It attaches to an RTI control system such as the XP-6s Control Processor on one end, and a device’s DB-9 serial port connector on the other end. The CM-232 is capable of one-way transmission (no receive function is supported) of user-defined character or binary strings. These character strings, as well as the baud rate, parity, and bit structure are programmed using RTI’s Integration Designer software package.
Read MoreMore Information Request for quotation